V-TEK TM-403, User Manual, Page: 77 / 306

D292106.6b.fm Tray Tab
Chapter 3: Human Machine Interface 3-35
An illustration of a tray with Pocket 1 and Pocket 2 identified will appear..
Head Jog Step is the distance in millimeters that the head will move when Jog is
pressed.
Note: The Jog Step fields require the value to be entered in the following format:
XXX.XX. (i.e. 100.00).
Tray Jog Step is the distance in millimeters that the tray will move when Jog is
pressed.
B. The Head Position indicates where the pick head is located in relation to the
Home position. The Learned Position indicates the current Pick position.
The Tray Position indicates where the tray is located in relation to the Home
position. The Learned Position indicates the current Pick position.
Pressing the Learn button saves the current tray and pick head positions as the
programmed pick location. This is the position the pick head will move to along the
X Axis (left/right) and the tray will move to along the Y Axis (forward/backward)
when picking a part from the
Tray Feeder .
Once the Learn button has been pressed, the Cancel button disappears. Press
the Cancel button to return to the Tray Tab .
Press the Finish button to calculate tube pitch and return to the Tray Feeder Tab .
Note: The TM-403 will use these settings for the current job. To save Tray Feeder Set-
tings for future jobs, go to the Job Tab, select a job name and Save .