V-TEK TM-403, User Manual, Page: 52 / 306

3-10 TM-403 User’s Guide
Job Tab D292106.6b.fm
3. The third Job Wizard step sets up Taper operation.
A. Tape Pitch is determined by the carrier tape
selected. Use the Pitch Setting Guide on the taper to
determine the correct pitch. Press the Tape Pitch
field to open a keypad and type in the desired value.
B. Seal Type toggles between PSA and Heat seal,
select correct seal type.
C. The Set Point fields for the Inner and Outer Sealer are used to set the desired
temperature for Heat Seal. Enter the correct value in both fields, then press the
right
Arrow Key to move to the next Job Wizard screen.
Note: The TM-403 accommodates a wide range of carrier tapes and cover tapes. Set-
tings may vary from one tape product to another. The recommended starting point is 90°
C. The maximum recommended operating temperature is 160° C
. The temperature for
each seal shoe should be increased or decreased as needed after running a peel force
test.
A
B
Job Wizard Step 3
C
C