D292106.8b.fm
Preparing to Run a Pre-programmed Job
Chapter 6: Operation
6- 5
2.
Press the
Home All Motors
button.
The motor homing sequence begins with the nozzle moving slowly upwards (
Z
Axis
movement). After about a three second delay, the pick head will begin to
move slowly to the right towards the taper (
X Axis
movement). At the same time,
the tray carriage will move slowly out to its
Tray Eject
position.
The pick head homing sequence will continue until the nozzle has risen to its
highest position and then returned to home and the head has moved all the way to
the right and then returned to home. The tray carriage homing sequence will
continue until the tray carriage has moved all the way out to the
Tray Eject
position
and then returned to home
Homing progress is displayed as a green bar in the
Pick Axis Motor
field of the
Homing
window. Once the nozzle and head have stopped moving, homing is
complete. A
Homing Succeeded!
message will appear on the bottom of the
screen.
Step 2:
Home
Motors
Summary of Contents for TM-403
