V-TEK TM-403, User Manual, Page: 113 / 306

D292106.7b.fm Test Seal
Chapter 4: Setup 4- 29
corresponding position lock and turn the adjusters.
Turning the wheel counter-clockwise will move the guide towards the operator.
Turning it clockwise will move the guide closer to the machine. Adjust the
Inner
Seal Adjust and the Outer Seal Adjust to the desired position, then tighten the
Position Locks to secure them.
4. Perform a Seal Test.
The V-TEK PT-55 Peel Force Tester is pictured above. (Sold separately.)
Proceed to Chapter 5: Vision Setup to configure the Vision System for operation.
If processing from tray to tray, see the next section of this chapter.
Inner Seal Adjust
Outer Seal Adjust
Position Lock
Position Lock