V-TEK TM-403, User Manual, Page: 27 / 306

D292106.4a.fm Assembling the TM-403
Chapter 1: Assembly & Installation 1- 7
3. Remove the TM-403 from the Crate.
a. The TM-403 is bolted to the bottom of the crate for shipping. Reach below the crate to
unfasten the bolts.
Note: If the optional 80/20 Frame was purchased, follow the assembly instructions in the
80/20 Frame Exploded Views document which can be found in the Exploded Views sec-
tion at the end of this manual before proceeding.
b. Moving the TM-403 Base Machine. The machine may be manually lifted from the
crate. The base machine weighs 247 lb. (112 Kg) so the task will require four people.
Position one person at each corner of the machine using the lift points illustrated above to
safely distribute the machine’s weight. Lift the machine from the crate and place it onto
the prepared work table/bench.
4. Position the TM-403 in the work area so there is at least 3 feet of clearance on all sides.
(See the
Preparing the Work Area section earlier in this chapter for details.)
5. The TM-403 is shipped with zip ties securing the pick head, the 2D Camera, the Tray
Feeder and any mobile portions of the machine. Cut and remove all zip ties.
Lift Points