V-TEK TM-403, User Manual, Page: 104 / 306

4-20 TM-403 User’s Guide
Configure HMI Settings D292106.7b.fm
An illustration of a tray with Pocket 1 and Pocket 2 identified will appear.
h. The distance the head moves with each Jog is set in the Head Jog Step field.
i. Press Learn. The Learned Position will now match the Current Position and
the Learn button will turn green and update to read Learned . The right Arrow
Key will also appear.
Note: It is useful to note the current position for both Pick Position 1 and Pick
Position 2 for future use or to help when making fine adjustments.
j. Press the right Arrow to move to the next Job Wizard screen.
8. Set Pick Nozzle Height The Pick Head ’s Z Axis (up/down) position needs to be
set at the Pick position. Use the controls in the screen below to place the Pick
Head in an accessible position so the pick height can be adjusted.
a. Use the Index arrow keys to move the Nozzle to the last column of Tray 2 .
b. Open the TM-403 enclosure doors to access the pick head.
Step 6:
Setup HMI
NOZZLE