V-TEK TM-403, User Manual, Page: 44 / 306

3-2 TM-403 User’s Guide
Introduction D292106.6b.fm
Introduction
This chapter gives an overview of the TM-403 Human Machine Interface (HMI) , defining the but-
tons, screens and setting options that allow the operator to customize the TM-403’s performance
to their taping needs.
Note: Proceed to Chapter 4: Setup for instructions on how to configure the HMI, to Chap-
ter 5: Vision Setup for instructions on configuring the vision system and to Chapter 6:
Operation for instructions on how to run a job.
Touch Screen
The user interacts with the TM-403 through a touch screen HMI which is located on the front of
the machine below the
Taper . Touching the HMI screen has the same effect as a left click with the
mouse. Although only lightly touching the buttons or data fields is necessary for activation, the
action is referred to as “pressing” in this manual.
Note : Use care when operating the touch screen and do not use any objects other than a
finger to touch the screen. A stylus can also be used to click the various buttons.