V-TEK TM-403, User Manual, Page: 26 / 306

1-6 TM-403 User’s Guide
Assembling the TM-403 D292106.4a.fm
Assembling the TM-403
Equipment Required
• Adjustable wrench (needs to fit 1 1/16” to 1 3/32” nut)
• Standard and Metric Hex Wrench Sets (provided with machine)
• 85-110 PSI air pressure system
Note: Read the TM-403 User’s Guide before assembling the TM-403.
Unpack the TM-403 Crate
1. Move the Crate to the Work Area. Use a fork lift to move the TM-403 crate to the pre-
pared work area. Ensure the fork is centered under the crate before lifting.
Note: Use a forklift with a minimum load capacity of 300 pounds (136 kg) and a fork
length that is a minimum of 40 inches (102 cm) so the fork fully extends beyond the crate
on the other side. The forklift should only be operated by a licensed/certified operator.
2, Unpack the Crate.
a. Remove the top and sides from the TM-403 crate. Set aside.
b. The TM-403 is shipped partially disassembled, with the Tower Light, Take-up Arm
and Carrier Tape/Feed Arm detached and wrapped in bubble wrap. Remove the smaller
items one at a time from the crate and place on a flat, stable surface for assembly.
c. Remove and discard the protective wrapping from each part.