V-TEK TM-403 User Manual Download Page 144

Page: 144 / 306

5-28

TM-403 User’s Guide

Configure Inspection

D292106.16c.fm

Configure Keyence Monitor

Monitor Display: Menu OFF

Title

: Displays the device name, the program number and the program name.

Tool name:

Displays the tool number and the tool name of the tool selected. The

selected tool can be switched.

Brightness correction range:

When Brightness correction is set, the range will

be displayed with a blue frame.

Tool window:

Displays the tool window which has been set.

Search Window:

If the search window of the tool is set, the range will be displayed

with a light blue frame.

MENU/OFF button:

Changes the screen from Menu ON to Menu OFF.

Status gauge

: Displays the result (OK/NG) of the tool selected.

OK/NG display:

Displays the total status result.

10.

Processing time:

Displays the time from receiving a trigger until the result is

output.

11.

Image Type display:

Displays the situation of the screen. Run mode or Test

mode.

Step 2:

Vision
Setup

CONFIGURE
MONITOR

Summary of Contents for TM-403



















































































































































































































































































































Search results

Summary of Contents for TM-403

Reviews:

V-TEK TM-403, User Manual, Page: 144 / 306

Search results

Summary of Contents for TM-403

Reviews: