D292106.9b.fm
Adjusting PSA Seal Quality
Chapter 7: Troubleshooting
7-27
Adjusting PSA Seal Quality
If a
Peel Force Test
determines the
PSA Sealer
is not generating a satisfactory seal, try one of
the adjustments below to improve seal strength.
Check Sealer Settings
Open the HMI
Taper Tab
. Review the settings on the four
Taper
Tab
screens to ensure
Tape
Settings
and
Sealer Settings
are appropriate for the current job.
Materials Used
For a
PSA seal,
seal strength is determined first by the nature of the materials used. It is nor-
mally recommended to use the same brand of cover and carrier tapes together as the manufac-
turers use the appropriate adhesive to match the material used to make the carrier tapes.
Seal Roller Pressure
The second factor in PSA seal strength is the pressure applied to the cover tape as it is sealed to
the carrier tape. The seal should appear as a solid stripe and it should not show any inconsisten-
cies. If it does, the alignment of the cover tape should be confirmed and then the pressure to the
seal rollers adjusted.
Summary of Contents for TM-403
