V-TEK TM-403, User Manual, Page: 61 / 306

D292106.6b.fm Job Tab
Chapter 3: Human Machine Interface 3-19
A. Enter the placement angle which was manually set in Step 8. The options are 0, -
90 and +90.
In the photo below, a part is shown at the pick position as viewed from the front of
the machine.
• If rotation is set at 0 , the part will be placed in the same orientation as it was
picked.
• If rotation is set at -90 , the part will be rotated 90 degrees clockwise prior to
placement.
• If rotation is set at +90 , the part will be rotated 90 degrees counter-clockwise
prior to placement.
14. Press the right Arrow Key to move to the next Job Wizard screen.
-90
0
+90
Rotation Options
Job Wizard Step 14