Introduction
D292106.2a.fm
ii
Introduction
Thank you for purchasing the
TM-403 Component Handling Machine
. The TM-403 is a table-
top pick and place tape and reel machine with vision, designed for use in production environ-
ments for electronic devices. This machine accepts devices loaded in trays. It features a 2D over
tape vision system for component verification. A touch screen interface simplifies the setup pro-
cess, and minimizes set up time and operator intervention for fast, easy functioning.
Standard Features:
• Touch screen operator interface for easy setup and operation
• Tray input, Tray or Tape output
• Ability to rotate comp/-90° or 180°
• Innovative universal adjustable heat and PSA sealer
• Software controlled advance movement of carrier tape (2mm to 144mm pitch)
• Adjustable track assembly for tape widths 8mm to 72 mm
• 2D Vision over tape inspection for Mark, Orientation and Empty Pocket Detection.
• User-friendly safety enclosure with multiple access points provides easy access with
minimal downtime
• Automatic
Jam in Track
and
Low Cover Tape Detection Sensors
Summary of Contents for TM-403
