V-TEK TM-403, User Manual, Page: 115 / 306

D292106.7b.fm Tray-to-Tray Output Option
Chapter 4: Setup 4- 31
Pull the Spring Loaded Tray Clamps
back to slide the trays into position.
Ensure the trays are placed so that the
front lip of the trays is under the
Stationary Tray Clamps and the side
of the tray is pressed against the
center datums.
If the tray lip doesn’t fit under the
Stationary Tray Clamps , loosen the
screws and adjust the clamps as
necessary. They may be raised or
lowered to adjust to different tray
thicknesses or rotated to
accommodate different tray
orientations.
Note: If using Jedec Trays which are thicker than standard Jedec tray thickness
(>7.62mm) do NOT use side Tray Clamps. Using the side clamps on trays which exceed
this thickness will result in a collision between the Tray Carriage and the Bridge.
3. Press Output Options . Select Tray Output , then set Pick and Place locations for
running parts from Tray to Tray.
Tray Options Screen: TRAY