V-TEK TM-403, User Manual, Page: 91 / 306

D292106.7b.fm Nozzle Installation
Chapter 4: Setup 4- 7
Nozzle Installation
The TM-403’s is shipped with the following nozzles and nozzle tips:
• (1) Quad Nozzle Shank (Part # 267090)
• (1) Small Precision Tool (SPT) Nozzle Shank (Part # 267091)
• (1) Convum Nozzle Shank (Part # 267008)
• (1) Large Quad Vacuum Cup (Part # 201297)
• (1) Medium Quad Vacuum Cup (Part # 201298)
• (1) Small Quad Vacuum Cup (Part # 201299)
• (1) SPT Vacuum Cup (Part # 201271)
• (1) Convum Vacuum Cup (Part # 201207)
• (2) Nozzle O-Rings (Part # 212025)
Note: Nozzle Tips are available in a wide range of sizes and style. See the Sug-
gested Spare Parts List in the back of this User’s Guide for more details. Contact
V-TEK Service for information on ordering additional
Nozzle Tips .
Selecting the Correct Nozzle & Nozzle Tip
To achieve the best picking results, select the largest cup size the part can accommo-
date. Maximizing the cup size gives the vacuum access to more surface area which
increases its pick-up capability. The goal is to use a nozzle cup that is just slightly smaller
than the part being picked.
The Convum bellows-style cups have a flexible flange that are useful for picking irregular
or heavy parts.
Step 4:
Nozzle
Installation
SELECT
NOZZLE
Convum Quad SPT