V-TEK TM-401, User Manual

Page: 70 / 292

3-28 TM-401 User’s Guide
MTID Tab D292104.6.fm
.
A. Help Icon
B. Head Jog Controls
C. Pick Wizard Control buttons
A. To see an illustration of the correct head placement, push the Help icon.
B. The Jog buttons in the Head Settings section are used to jog the head forward or
backward along the X Axis (left/right) until the nozzle is centered over the last
Tube Pocket .
Head Jog Step is the distance in millimeters that the head will move when Jog is
pressed.
Note: Enter Jog Step field values in the following format: XXX.XX. (i.e. 100.00).
The Head Position message indicates where the pick head is located in relation
to the Home position. The Learned Position indicates the current Pick position.
C. Press the Cancel button to return to the MTID Tab . Once the Learn button has
been pressed, the Cancel button disappears.
Pressing Learn saves the current head position as the programmed pick location.
This is the position the pick head will move to along the X Axis (left/right) when
picking a part from the
Tube Feeder .
Press the Finish button to calculate tube pitch and return to the MTID Tab .
Note: The TM-401 will use these settings for the current job. To save MTID Settings for
future jobs, go to the Job Tab, select a job name and Save .
B
C
A