D292104.16.fm
Configure Inspection
Chapter 5: Setup
5- 29
Monitor Display: Menu ON
1.
Title
: Displays the device name, the program number and the program name.
2.
Tool name:
Displays the tool number and the tool name of the tool selected. The
selected tool can be switched.
3.
Brightness correction range:
When Brightness correction is set, the range will
be displayed with a blue frame.
4.
Tool window:
Displays the tool window which has been set.
5.
Search Window:
If the search window of the tool is set, the range is displayed with
a light blue frame.
7.
MENU/OFF button:
Changes the screen from Menu ON to Menu OFF.
8.
Status gauge
: Displays the result (OK/NG) of the tool selected.
9.
OK/NG display:
Displays the total status result.
10.
Processing time:
Displays the time from receiving a trigger until the result is
output.
11.
Image Type display:
Displays the situation of the screen. Run mode or Test
mode.
12.
Trig button:
Displayed when the external trigger is set. When this button is
touched, a trigger signal is sent to the sensor.
13.
Zoom button:
Changes the display to full screen mode and allows image
enlargement.
14.
View button:
Displays the menu to select how to show the tools and the analyze
screen.
15.
Monitor settings button:
Displays the monitor screen.
Step 2:
Vision
Setup
CONFIGURE
MONITOR
Summary of Contents for TM-401
