manualshive.com logo in svg

V-TEK TM-401, User Manual

Share
Download
V-TEK TM-401 User Manual Download Page 13

Safety Features

D292104.2.fm

ix

Open Doors Stop Operation 

All automated motion stops and the machine is unable to enter 

Run Mode

 when an enclosure

door is opened. An error message will display at the bottom of the HMI Run screen and a chirp-
ing alarm sound will alert the user that the TM-401 door(s) are open.

The enclosure doors may be left open during basic set-up procedures such as positioning the
pick head at place or pick locations. If the enclosure doors are left open during setup the TM-401
automatically reduces the speed of the pick head to a fraction of its normal operating speed to
prevent operator injury due to collision, etc.

System Alarm

The system alarm will sound and halt the 

Run Mode

 process of the machine at any time a Sys-

tem Alarm occurs. A description of the System Alarm and suggestions for resolving it will appear
on the HMI 

Main Screen.

Lockout/Tagout

The 

Main Switch

 can be turned 

ON

 and 

OFF

 by turning the

red knob back and forth. When the red knob is placed in the

OFF

 position, the lockout/tagout hole is exposed. The 

Main

Switch

 can then be locked out by placing a lock through the

hole.

 

The 

Air Regulator

 can be turned 

ON

 and 

OFF

 by turning

the top red cap back and forth. When the red cap is
placed in the 

OFF

 position, the lockout/tagout hole will be

exposed. The 

Air Regulator

 can then be locked out by

placing a lock through the hole. 

Be sure to follow your company guidelines regarding
lockout/tagout procedures.

lockout/tagout hole 

Summary of Contents for TM-401





































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands