15.SPECIFICATIONS
148
15. SPECIFICATIONS
15-1. Analog section
Load cell excitation
10V DC ± 5%, output current within 120mA
Remote sensing
(Up to four 350
Ω
load cells can be connected in parallel.)
Zero and span
Zero adjustment range:
0 – approximately 2mV/V
Span adjustment range:
0.3 – 2.0mV/V
Minimum input sensitivity
0.3
μ
V/Count
Accuracy
Non-linearity:
Within 0.01%FS
Zero drift
：
Within 0.1
μ
V/
℃
RTI
Gain drift
：
Within 15ppm/
℃
Analog filter
Bessel low-pass filter
-12dB/oct, cutoff frequency 2/4/6/8Hz
A/D converter
Rate:
500 times/sec
Resolution:
16bit
Resolution
1/10000 (internal resolution
1/40000)
15-2. Setting section
Setting method
Setting by a host on the CC-Link network, or a host on the RS-
232C interface, such as remote console unit (C110/C120), PC,
etc.
Storage of set values
Initial set values:
NOV RAM (nonvolatile RAM)
Other set values:
Lithium-battery-backed-up
C-MOS
RAM
* Rewriting can be locked in either case.
External signal input/output (14P Amphenol connector)
Input (5 points):
ON when short-circuited with the COM terminal
Output (7 points):
Transistor open collector output
ON when the transistor is ON
Vce=30V (max), Ic=50mA (max)
Summary of Contents for F156
Page 1: ...F156 WEIGHING CONTROLLER 07 JUN 2012 REV 1 40 OPERATION MANUAL CC Link Ver 1 10...
Page 115: ...7 REMOTE CONSOLE UNIT 106 Monitor change Change the display with the key...
Page 120: ...7 REMOTE CONSOLE UNIT 111 Monitor change Change the display with the keys 0 to 9 1 2 3 4 5 0...
Page 155: ...13 DIMENSIONS 146 13 DIMENSIONS...
