6.FUNCTIONS
55
6-3. Digital Zero Regulation Value
Set a range of zero point adjustment (a gap from the registered Zero Calibration value) by
digital zero or zero tracking. If digital zero operation is performed or zero tracking is actuated
where the digital zero regulation value is exceeded, the “zero alarm” status turns on, and the
digital zero regulation value is subtracted from the gross weight.
Setting range / 0000 to 9999
Initial value / 200
CC-Link
0
45
MSB
LSB
RWw0006
RWw0005
RWw0004
00000 to 99999
Write the code No. and set value.
H
L
Code No.
Set value
remote register
Word size
Console
1) Select code 45.
2) Press the ENT key, and then set the
zero regulation value.
3) Determine the setting with the ENT key.
Zero regulation value
（
0000
～
9999
）
Summary of Contents for F156
Page 1: ...F156 WEIGHING CONTROLLER 07 JUN 2012 REV 1 40 OPERATION MANUAL CC Link Ver 1 10...
Page 115: ...7 REMOTE CONSOLE UNIT 106 Monitor change Change the display with the key...
Page 120: ...7 REMOTE CONSOLE UNIT 111 Monitor change Change the display with the keys 0 to 9 1 2 3 4 5 0...
Page 155: ...13 DIMENSIONS 146 13 DIMENSIONS...
