Unipulse F156, Operation Manual, Page: 28 / 160

3.CC-LINK INTERFACE
19
Set value writing and operation instructions (R/W relay OFF) continued
Item Code No.
(RWw0006)
Setting Range
(RWw0004~0005)
Balance Weight 40 0 to 99999
Capacity 41 0 to 99999
Minimum Scale Division 42 1 to 100
Net Over 43 0 to 99999
Gross Over 44 0 to 99999
Digital Zero Regulation Value 45 0 to 9999
Decimal Place 46 0 to 3
Gravitational Acceleration 47 1 to 16
Lock (Soft) 49 0 to 1
Simple Comparison /
Sequence Mode Selection 50 0 to 1
Adjust Feeding in Sequence Mode 51 0 to 1
Near Zero Check in Sequence Mode 52 0 to 1
Weight Value Check in Sequence Mode 53 0 to 1
External Control Output Selection 0 60 0 to 16
External Control Output Selection 1 61 0 to 16
External Control Output Selection 2 62 0 to 16
External Control Output Selection 3 63 0 to 16
External Control Output Selection 4 64 0 to 16
External Control Output Selection 5 65 0 to 16
External Control Output Selection 6 66 0 to 16
External Control Input Selection 0 70 0 to 8
External Control Input Selection 1 71 0 to 8
External Control Input Selection 2 72 0 to 8
External Control Input Selection 3 73 0 to 8
External Control Input Selection 4 74 0 to 8
Tare Subtraction 80 (command)
Tare Reset 81 (command)
Digital Zero 82 (command)
Digital Zero Reset 83 (command)
Sequence Start 84 (command)
Sequence Stop 85 (command)
Sequence Error Reset 86 (command)
Zero Calibration 90 (command)
Span Calibration 91 (command)