Safety Precautions
CAUTION
●
Be sure to disconnect the power cable when performing the following.
- Attachment/detachment of load cell connector, external I/O connector, console or
RS-232C connection connector.
- Wiring/connection of cables to terminal blocks.
- Connection of the ground line.
●
For connection to the signal I/O terminal block, wire correctly after checking the signal
names and terminal block numbers.
Also, turn off the power of the main body before connection/wiring to the signal I/O
terminal block.
●
Use shielded cable for connection with load cell unit and RS-232C.
●
Take adequate shielding measures when using at the following locations.
- Near a power line.
- Where a strong electric field or magnetic field is formed.
- Where static electricity, relay noise or the like is generated.
●
Do not install in the following environments.
- Places exposed to direct sunlight.
- Where the temperature and/or humidity exceeds the range in the specifications.
- Place
ｓ
with large quantities of dust, salt or iron powder.
- Where the main body is directly affected by vibration or shock.
●
Do not use it, broken down.
●
When you send F156 by repair etc., please take sufficient measures against a shock.
Summary of Contents for F156
Page 1: ...F156 WEIGHING CONTROLLER 07 JUN 2012 REV 1 40 OPERATION MANUAL CC Link Ver 1 10...
Page 115: ...7 REMOTE CONSOLE UNIT 106 Monitor change Change the display with the key...
Page 120: ...7 REMOTE CONSOLE UNIT 111 Monitor change Change the display with the keys 0 to 9 1 2 3 4 5 0...
Page 155: ...13 DIMENSIONS 146 13 DIMENSIONS...
