12.ERROR CODES
144
12. ERROR CODES
Error code and Error assistance code
When both are 0, there is no error.
Error codes are “1” for calibration errors, “2” for weight errors, “3” for command errors, “4” for
system errors, and “5” for sequence errors. The description of each error and corresponding
error assistance code are as shown below.
◇
Calibration errors (error code=1)
◇
Weight errors (error code=2)
Contents of error
Error
assistance code
Console
message
The zero point must be re-calibrated.
1
cErr1
The initial tare is above the zero adjustment range.
2
cErr2
The initial tare is minus.
3
cErr3
The entered balance weight value is greater than the
maximum capacity.
4
cErr4
The entered balance weight value is "00000".
5
cErr5
The output of the load cell is short of the span adjustment
range.
6
cErr6
The output of the load cell is minus.
7
cErr7
The output of the load cell is over the span adjustment range.
8
cErr8
The weight value is not stable and calibration stopped.
9
cErr9
Contents of error
Error
assistance code
Console
message
A/D converter input over
1
LoAd
A/D converter input minus over
2
-LoAd
Net > net over set value
3
oFL1
Gross > ca 9 scale divisions
4
oFL2
Gross > gross over set value
5
oFL3
Zero alarm
6
No change
Summary of Contents for F156
Page 1: ...F156 WEIGHING CONTROLLER 07 JUN 2012 REV 1 40 OPERATION MANUAL CC Link Ver 1 10...
Page 115: ...7 REMOTE CONSOLE UNIT 106 Monitor change Change the display with the key...
Page 120: ...7 REMOTE CONSOLE UNIT 111 Monitor change Change the display with the keys 0 to 9 1 2 3 4 5 0...
Page 155: ...13 DIMENSIONS 146 13 DIMENSIONS...
