Unipulse F156, Operation Manual, Page: 131 / 160

9.SI/F 2-WIRE SERIAL INTERFACE
122
SI/F G/N selection
Select the weight value displayed/printed on the device connected to the SI/F.
Setting / 1
：
Net weight 0
：
Gross weight
CC-Link
0 39
MSB LSB
RWw0006
RWw0005
RWw0004
Write the code No. and set value.
H
L
0
0 or 1
Word size
remote register
Set value
Code No.
Console
1) Select code 39.
2) Press the ENT key, and then set the SI/F
G/N selection.
3) Determine the setting with the ENT key.
SI/F G/N selection
Irrespective of this setting, information including net weight, gross weight,
and tare weight is always sent from the F156, and some devices connected
to the SI/F allow selection of the weight value displayed/printed on the
device side. In such a case, this setting is validated by setting the weight
value displayed/printed as indicator display value.