TransCore SmartPass AI1611, System Manual

Page: 158 / 179

Commands
537 Display Echo Status
Command 537 displays echo mode status. In basic mode (610) and data inquiry
mode (613), the reader may be configured to enable (6171) or disable (6170) the
echo of received commands. Refer to commands 6170 and 6171 for more
information.
Reader message:
ECHO <0-1>
where
0
echo status disabled
1
echo status enabled
540 Display Flash Checksum
Command 540 displays the flash memory checksum.
Reader message:
PCKS I0000 Exxxx
where
0000
not applicable to SmartPass
xxxx
represents the 4-byte ASCII representation of the flash
memory checksum
543 Display Boot Checksum
Command 543 displays the boot ROM checksum.
Reader message:
BCKS xxxx
where
xxxx represents the 4-byte ASCII representation of the boot ROM checksum
550 Display Periodic Check Tag Status
Command 550 displays parameters for the periodic check tag function. The periodic
check tag function may be enabled by command 8120 or disabled by command 810.
The check tag interval is fixed at 30 minutes. If the check tag function is enabled by
command 8110, the periodic function will be disabled.
Reader message:
SCTS M<0–1> T5
where
M0
periodic check tag disabled
(factory default)
9-35