TransCore SmartPass AI1611, System Manual

Page: 130 / 179

Commands
Number Command Name Reader Message
525 Display comm protocol ECPS Px Txx Xx S0
P0 = basic
P1 = ECP
P2 = echo Inquiry
Txx = ECP timeout
ms = 50 * xx
TFF = disabled ECP timeout
X0 = no flow control
X1 = software flow control
X2 = hardware flow control
S0 = SOM character is #
526 Display I/O status IOST Cx Ox Ix Dx
C0 = host controls outputs
C1 = predefined output mode
O0 = both outputs off
O1 = output0 on
O2 = output1 on
O3 = both outputs on
I0 = both inputs false
I1 = input0 true
I2 = input1 true
I3 = both inputs true
D0–DF = output pulse duration
(4,8,12,16,20,24,32,40,48,60,76,152
228,300,376,752 ms)
527 Display RF status RFST Cx Ox T1
C0 = RF controlled by host
C1 = RF-by-input control
O0 = RF off
O1 = RF on
T1 = uniqueness timeout of 2 min
529 Display presence input status PRST Px D0 Ax Tx Ix
P0 = disable presence w/o tag reports
P1 = enable presence w/o tag reports
D0 = min presence true period of 0 ms
A0 = RF off on timeout
A1 = RF off on timeout or tag
A2 = RF off on timeout or no presence
Tx = RF timeout period
T0 = always expired
T1–TE = (4,8,12,20,24,32,48,60,
92,152,300,452,600,752 ms)
TF = infinite
I0 = input inversion disabled
I1 = input inversion enabled
530 Display RF0 filter status RF0S Ux V0
U0 = one ID separation
U1 = two ID
U2 = transmit all
U3 = buffer all
9-7