TransCore SmartPass AI1611, System Manual

Page: 150 / 179

Commands
A...A B...B%nn-0-hh-q
A...A B...B&HH:MM:SS.hhMM/DD/YY%nn-0-hh-q
505 Display Software Version
Command 505 displays the reader model number, software version information, and
assigned serial number.
Reader message:
Model [model] Ver [software version] SNYYYYYY
where
YYYYYY
is the serial number expressed in decimal digits (0–9) with the
first two digits representing the year
506 Display Hardware Configuration Information
Command 506 displays hardware configuration information stored into the reader
memory during system testing.
Reader message:
(An ASCII string from 1 to 20 characters in length)
520 Display Power Fail Bit
Command 520 displays the value of the reader power fail bit. The power fail bit
changes from 0 to 1 when power to the reader is interrupted. To reset the bit, use
reset reader command 63 or reset power fail bit command 65. On initial power up,
the host should transmit one of these two commands to clear the power fail bit.
Reader message:
PWRB P<0-1>R0
where
P0
no power failure has occurred
P1
power failure has occurred
R0
not applicable to SmartPass
521 Display Reader ID Number
Command 521 displays the reader ID that is sent in the auxiliary data field.
Reader message:
RDID xx
where
xx
01–FF (hex)
9-27