TransCore SmartPass AI1611, System Manual

Page: 136 / 179

Commands
Command name Code Reader Message
Comm port parameters Display 522 MAIN Bx Sx Px D0
B0 = 110
B1 = 300
B2 = 1200
B3 = 2400
B4 = 4800
B5 = 9600
B6 = 19.2
S0 = one stop bit
S1 = two stop bits
P0 = no parity
P1 = even
P2 = odd
D0 = EOL delay of 0 ms
Comm protocol Display 525 ECPS Px Txx Xx S0
P0 = basic
P1 = ECP
P2 = data inquiry
Txx = ECP timeout
ms = 50 * xx
TFF = disabled ECP timeout
X0 = no flow control
X1 = software flow control
X2 = hardware flow control
S0 = SOM character is #
Command mode Switch 01 Done
Data inquiry protocol Select 613 Done or Error
Data mode Switch 00 Done
Date Set
S...S = MM/DD/YY 21S...S Done or Error
Default operating parameters Load 66F Done or Error
Destructive flash test Perform 97 Done or Error
Diagnostic results Display 661 DIAG Rx Ex Dx Cx
R0 = boot ROM OK
R1 = boot failed
E0 = flash memory OK
E1 = flash failed
D0 = external RAM OK
D1 = RAM failed
C0 = RTC OK
C1 = RTC failed
Diagnostics Perform all
Use 661 to display diagnostic results. 669 Done or Error
Download mode Exit 99 Model [model]
Ver [Ver no.] SN [serial no.]
Copyright [date]
TransCore
Download mode Switch 05 Done
9-13