TransCore SmartPass AI1611, System Manual

Page: 140 / 179

Commands
Command name Code Reader Message
RF timeout Set
N = 0–F
(always expired,
4,8,12,20,2432,48,60,92,152,300,452
,600,752 ms, infinite) 693N Done or Error
RF0 filter status Display 530 RF0S Ux V0
U0 = one ID separation
U1 = two ID
U2 = transmit all
U3 = buffer all
Selected checktag option Display 551 CTAG x
0 = internal
1 = external
Serial number Set
S...S = ASCII string
(maximum length of 6 characters) 695S...S Done
Status change reports Disable 820 Done
Stop bit Use one 1010 Done
Stop bits Use two 1011 Done
Tag ID separation Select one 4100 Done
Tag ID separation select two 4101 Done
Tag translation mode Disable 452 Done
Tag translation mode Display 534 TT x
0 = disabled
1 = enabled
Tag translation mode Enable 453 Done
Time and date append Disable 300 Done or Error
Time and date append Enable 302 Done or Error
Time and date Display 22 HH:MM:SS.hh MM/DD/YY
Time Set
S...S = HH:MM:SS or HH:MM:SS:hh 20S...S Done or Error
Version Display 505 Model [model]
Ver [Ver no.] SN [serial no.]
Wiegand mode Disable 450 Done
Wiegand mode Enable 451 Done
Wiegand mode status Display 532 T0F x
0 = disabled
1 = enabled
Wiegand retransmit interval Display 533 WTI xx
xx = 01–FF seconds
Wiegand retransmit interval Set
NN = 01–FF seconds 46NN Done or Error
9-17