TransCore SmartPass AI1611, System Manual

Page: 129 / 179

SmartPass® Integrated Reader 2450 MHz (High Voltage) System Guide
Number Command Name Reader Message
46NN Set Wiegand retransmit
interval
NN = 01–FF seconds Done or Error
48N Select dual-frame processing
mode
N = 0–3
0 = Reset uniqueness on A,
transmit A
1 = Reset uniqueness on B,
transmit B
2 = Reset uniqueness on A,
transmit both
3 = Reset uniqueness on B,
transmit both Done
505 Display version Model [model]
Ver [Ver no.] SN [serial no.]
506 Display hardware
configuration information
S...S
S...S = ASCII string
(maximum length of 20 characters)
520 Display power fail bit PWRB Px R0
P0 = no power fail has occurred
P1 = power fail has occurred
521 Display reader ID number RDID xx
xx = 00–FF
522 Display comm port
parameters MAIN Bx Sx Px D0
B0 = 110
B1 = 300
B2 = 1200
B3 = 2400
B4 = 4800
B5 = 9600
B6 = 19.2
S0 = one stop bit
S1 = two stop bits
P0 = no parity
P1 = even
P2 = odd
D0 = EOL delay of 0 ms
524 Display appended info status IDAP Tx Dx Xx
T0 = time not appended
T1 = time appended
D0 = date not appended
D1 = date appended
X0 = aux info not appended
X1 = aux info appended
9-6