Toyota AVALON 2008 Quick Reference Manual Download Page 92

Page: 92 / 472

1-3. Adjustable components (seats, steering wheel, mirrors)

Before driving

AVALON_U_(L/O_0802)

CAUTION

While driving

Observe the following precautions.

Failing to do so may result in losing control of the vehicle and cause an acci-
dent, resulting in death or serious injury.

Do not adjust the mirrors.

Before driving, be sure to make an adjustment properly.

When the mirror heaters are operating (if equipped)

Do not touch the mirror surface as the mirror surface becomes hot.

NOTICE

If ice should jam the mirror

Do not operate the control or scrape the mirror face. Use a spray de-icer to
free the mirror.

Summary of Contents for AVALON 2008

























































































































































































































































































































































































































































































Search results

Summary of Contents for AVALON 2008

Reviews:

Brands by name

Popular brands

Toyota AVALON 2008, Quick Reference Manual

Search results

Summary of Contents for AVALON 2008

Reviews:

Brands by name

Popular brands