manualshive.com logo in svg

Toyota AVALON 2008, Quick Reference Manual

Share
Download
Toyota AVALON 2008 Quick Reference Manual Download Page 329

4

Mainten

ance an

d ca

re

305

4-3. Do-it-yourself maintenance

AVALON_U_(L/O_0802)

CAUTION

n

When raising your vehicle

Make sure to observe the following to reduce the possibility of death or seri-
ous injury.

l

Do not use the jack that was supplied with your vehicle.

l

Do not put any part of your body or get underneath the vehicle supported 
only by the jack.

 

Always use automotive jack stands or a solid, level surface.

l

Do not start the engine while the vehicle is supported by the floor jack.

l

Stop the vehicle on level firm ground, firmly set the parking brake and put 
the shift lever in “P”.

l

Make sure to set the floor jack properly at the jack point.

 

Raising the vehicle with an improperly positioned floor jack will damage 
the vehicle and may cause the vehicle to fall off the floor jack.

l

Do not raise the vehicle while someone is in the vehicle.

l

When raising the vehicle, do not place any objects on top of or underneath 
the floor jack.

l

Lift up the vehicle using a floor jack 
such as the one shown in the illustra-
tion.

Summary of Contents for AVALON 2008

























































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands