Toyota AVALON 2008 Quick Reference Manual Download Page 332

Page: 332 / 472

308

4-3. Do-it-yourself maintenance

AVALON_U_(L/O_0802)

Engine oil

With the engine at operating temperature and turned off, check the oil
level on the dipstick.

Checking the engine oil

Park the vehicle on level ground. After turning off the engine,
wait a few minutes for the oil to drain back into the bottom of
the engine.

Hold a rag under the end and
pull the dipstick out.

Wipe the dipstick clean.

Reinsert the dipstick fully.

Holding a rag under the end, pull the dipstick out and check
the oil level.

Wipe the dipstick and reinsert it fully.

Low

Full

STEP

Summary of Contents for AVALON 2008

























































































































































































































































































































































































































































































Search results

Summary of Contents for AVALON 2008

Reviews:

Brands by name

Popular brands

Toyota AVALON 2008, Quick Reference Manual

Search results

Summary of Contents for AVALON 2008

Reviews:

Brands by name

Popular brands