Toyota AVALON 2008 Quick Reference Manual Download Page 333

Page: 333 / 472

Mainten

ance an

d ca

309

4-3. Do-it-yourself maintenance

AVALON_U_(L/O_0802)

Adding engine oil

If the oil level is below or near
the low level mark, add engine
oil of the same type as already in
the engine.

Make sure to check the oil type and prepare the items needed before
adding oil.

Remove the oil filler cap.

Add engine oil slowly, checking the dipstick.

Install the filler cap, turning it clockwise.

Oil grade

ILSAC multigrade engine oil

Oil quantity

(Low

→

Full)

1.6 qt. (1.5 L, 1.3 Imp. qt.)

Items

Clean funnel

STEP

Summary of Contents for AVALON 2008

























































































































































































































































































































































































































































































Search results

Summary of Contents for AVALON 2008

Reviews:

Brands by name

Popular brands

Toyota AVALON 2008, Quick Reference Manual

Search results

Summary of Contents for AVALON 2008

Reviews:

Brands by name

Popular brands