Toyota AVALON 2008 Quick Reference Manual Download Page 361

Page: 361 / 472

337

4-3. Do-it-yourself maintenance

Mainten

ance an

d ca

AVALON_U_(L/O_0802)

Air conditioning filter

The air conditioning filter must be cleaned or changed regularly to

maintain air conditioning efficiency.

Removal method

Set the air conditioning system to recirculated mode.

The air conditioning filter case cannot be removed with the sys-
tem in the outside air mode.

Turn the “ENGINE START STOP” switch or the engine
switch to OFF mode.

Open the glove box. Remove
the screw with a Phillips-head
screwdriver and slide off the
damper.

Push in each side of the glove
box to disconnect the claws.

STEP

Summary of Contents for AVALON 2008

























































































































































































































































































































































































































































































Search results

Summary of Contents for AVALON 2008

Reviews:

Brands by name

Popular brands

Toyota AVALON 2008, Quick Reference Manual

Search results

Summary of Contents for AVALON 2008

Reviews:

Brands by name

Popular brands