manualshive.com logo in svg

Toyota AVALON 2008, Quick Reference Manual

Share
Download
Toyota AVALON 2008 Quick Reference Manual Download Page 183

157

2-4. Using other driving systems

2

Wh

en drivin

g

AVALON_U_(L/O_0802)

n

Dynamic laser cruise control warning lights, display and buzzers

Warning lights, display and buzzers are used to indicate a system malfunc-
tion or to alert you to the need for caution while driving.

The warning codes indicate the following.

If the same code appears again after implementing the correction procedure, 
or if the cruise control cannot be set, contact your Toyota dealer.

n

Switching modes

The mode cannot be switched to constant speed control mode if vehicle-to-
vehicle distance control mode has been used. The mode also cannot be 
switched from constant speed control to vehicle-to-vehicle control mode. 
Turn the system off by pressing the “ON-OFF” button, and turn it on again.

“CRUISE” indicator light

Master warning light

Warning code

Warning code

Details

Correction procedures

C1

Indicates that the laser 
radar sensor is dirty or 
covered with ice.

Clean the sensor.

C2

Indicates that the system 
is unable to judge the vehi-
cle-to-vehicle distance.

• Stop the wiper or switch 

the wiper to variable inter-
mittent operation.

• Avoid direct sunlight.
• Wait until the weather 

becomes clear.

E3  

(Flashing)

Indicates that a system 
malfunction has been 
detected.

Turn off and restart the 
“ENGINE START STOP” 
switch or the engine 
switch.

Summary of Contents for AVALON 2008

























































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands