manualshive.com logo in svg

Toyota AVALON 2008, Quick Reference Manual

Share
Download
Toyota AVALON 2008 Quick Reference Manual Download Page 132

105

1-7. Safety information

1

Before driving

AVALON_U_(L/O_0802)

Fully extend the shoulder strap 
and then allow it to retract 
slightly into the ALR lock mode.

Lock mode allows the seat belt to 
retract only. 

While pushing the child restraint 
system into the rear seat, allow 
the shoulder belt to retract until 
the child restraint system is 
securely in place.

After the shoulder belt has 
retracted to a point where there is 
no slack in the belt, pull the belt to 
check that it cannot be extended. 

STEP

3

STEP

4

Summary of Contents for AVALON 2008

























































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands