Toyota AVALON 2008 Quick Reference Manual Download Page 232

Page: 232 / 472

207

3-2. Using the audio system

Inte

rior fe

atures

AVALON_U_(L/O_0802)

Loading, ejecting and selecting MP3 and WMA discs

Refer to the section titled “Using the CD player” for details. (

→

P. 198)

Selecting a folder

Press “

∧

” or “

∨

” on

Selecting the desired folder by cueing the first file of each
folder

Press and hold

until you hear a beep. When the desired

folder is reached, press the button again.

Returning to the first folder

Press and hold “

∨

” on

until you hear a beep.

Selecting and scanning files

Selecting one file at a time

Turn

or press “

∧

” or “

∨

” on

to select the desired file.

Selecting a desired file by cueing the files in the folder

Press .

When the desired file is reached, press the button again.

Fast-forwarding and reversing files

To fast-reverse, press and hold

To fast-forward, press and hold

Summary of Contents for AVALON 2008

























































































































































































































































































































































































































































































Search results

Summary of Contents for AVALON 2008

Reviews:

Brands by name

Popular brands

Toyota AVALON 2008, Quick Reference Manual

Search results

Summary of Contents for AVALON 2008

Reviews:

Brands by name

Popular brands