Toyota AVALON 2008 Quick Reference Manual Download Page 405

Page: 405 / 472

382

5-2. Steps to take in an emergency

AVALON_U_(L/O_0802)

If you have a flat tire

Remove the flat tire and replace it with the spare provided.

Before jacking up the vehicle

Stop the vehicle on a hard, flat surface.

Set the parking brake.

Shift the shift lever to “P”.

Stop the engine.

Turn on the emergency flashers.

Location of the spare tire, jack and tools

Jack handle

Jack

Wheel nut

wrench

Spare tire

cover

Luggage floor

cover

Spare tire

Summary of Contents for AVALON 2008

























































































































































































































































































































































































































































































Search results

Summary of Contents for AVALON 2008

Reviews:

Brands by name

Popular brands

Toyota AVALON 2008, Quick Reference Manual

Search results

Summary of Contents for AVALON 2008

Reviews:

Brands by name

Popular brands