Toyota AVALON 2008 Quick Reference Manual Download Page 432

Page: 432 / 472

410

6-1. Specifications

AVALON_U_(L/O_0802)

Cooling system

Ignition system

Electrical system

Capacity

8.8 qt. (8.3 L, 7.3 lmp.qt.)

Coolant type

Use either of the following:

• “Toyota Super Long Life Coolant”
• Similar high-quality ethylene glycol-based non-

silicate, non-amine, non-nitrite, and non-borate
coolant with long-life hybrid organic acid technol-
ogy

Do not use plain water alone.

Spark plug
Make

DENSO

FK20HR11

Gap

0.043 in. (1.1 mm)

NOTICE

Iridium-tipped spark plugs

Use only iridium-tipped spark plugs. Do not adjust gap when tuning engine.

Battery
Open voltage at
68

F (20

C):

12.6

⎯

12.8 V Fully charged

12.2

⎯

12.4 V Half charged

11.8

⎯

12.0 V Discharged

(Voltage is checked 20 minutes after the engine
and all lights are turned off.)

Charging rates

5A max.

Summary of Contents for AVALON 2008

























































































































































































































































































































































































































































































Search results

Summary of Contents for AVALON 2008

Reviews:

Brands by name

Popular brands

Toyota AVALON 2008, Quick Reference Manual

Search results

Summary of Contents for AVALON 2008

Reviews:

Brands by name

Popular brands