manualshive.com logo in svg

Toyota AVALON 2008, Quick Reference Manual

Share
Download
Toyota AVALON 2008 Quick Reference Manual Download Page 12

10

FEATURES/OPERATIONS

Automatic Transmission

* The “ENGINE START STOP” switch/engine must be ON and the brake

pedal depressed to shift from “Park.”

Downshifting increases power going uphill, or provides engine braking
downhill. For best fuel economy during normal driving conditions, always
drive with the shift lever in the “D” position.

Floor shift type:

+

: Upshift (push and release)

-

: Downshift (pull and release)

“S” (Sequential) mode

Shift the shift lever to “S” position from “D” position.

Park

*

Reverse

Neutral

Drive

“S” mode

“S”

“D” 

Steering lock release

Turn

Turn

Smart Key system

Without Smart Key system

Push

Turn

Auto lock functions

Automatic door locks can be programmed to operate in two different
modes, or turned OFF.
1. Doors lock: when shifting from “Park.”

Doors unlock: when shifting into “Park.”

2. Doors lock: when the vehicle speed goes above 12 mph.

Doors unlock: when the driver’s door is opened within 10 seconds after
turning the “ENGINE START STOP” switch or the engine switch OFF.

Refer to the 

Owner’s Manual

for more details.

Summary of Contents for AVALON 2008

























































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands