manualshive.com logo in svg

Toyota AVALON 2008, Quick Reference Manual

Share
Download
Toyota AVALON 2008 Quick Reference Manual Download Page 345

4

Mainten

ance an

d ca

re

321

4-3. Do-it-yourself maintenance

AVALON_U_(L/O_0802)

Washer fluid

If any washer does not work or 
the low washer fluid warning light 
comes on, the washer tank may 
be empty. Add washer fluid.

NOTICE

n

When recharging the battery

Never recharge the battery while the engine is running. Also, be sure all 
accessories are turned off.

CAUTION

n

When refilling the washer fluid 

Do not refill the washer fluid when the engine is hot or running, as the 
washer fluid contains alcohol and may catch fire if spilled on the engine etc.

NOTICE

n

Do not use any fluid other than washer fluid 

Do not use soapy water or engine antifreeze instead of washer fluid.

 

Doing so may cause streaking on the vehicle’s painted surfaces.

n

Diluting washer fluid

Dilute washer fluid with water as necessary. 

 

Refer to the freezing temperatures listed on the washer fluid tank.

Summary of Contents for AVALON 2008

























































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands