Toyota AVALON 2008 Quick Reference Manual Download Page 424

Page: 424 / 472

W
h

en
t

ub
le

ise
s

401

5-2. Steps to take in an emergency

AVALON_U_(L/O_0802)

If your vehicle overheats

If your engine overheats:

Stop the vehicle in a safe place and turn off the air condi-
tioning system.

Check to see if steam is coming out from under the hood.

If you see steam:

Stop the engine and carefully lift the hood.

If you do not see steam:

Leave the engine running and carefully lift the hood.

Remove the engine compartment cover. (

→

P. 307)

Check to see if the cooling fan is operating.

If the fan is operating:

Wait until the engine coolant temperature gauge begins
to fall and then stop the engine.

If the fan is not operating:

Stop the engine immediately and call your local Toyota
dealer.

After the engine has cooled
down sufficiently, check the
coolant level and inspect the
radiator core (radiator) for any
leaks.

STEP

Summary of Contents for AVALON 2008

























































































































































































































































































































































































































































































Search results

Summary of Contents for AVALON 2008

Reviews:

Brands by name

Popular brands

Toyota AVALON 2008, Quick Reference Manual

Search results

Summary of Contents for AVALON 2008

Reviews:

Brands by name

Popular brands