Toyota AVALON 2008 Quick Reference Manual Download Page 312

Page: 312 / 472

288

AVALON_U_(L/O_0802)

4-1. Maintenance and care

Cleaning and protecting the vehicle exterior

Perform the following to protect the vehicle and maintain it in prime

condition.

Working from top to bottom, liberally apply water to the vehicle
body, wheel wells and underside of the vehicle to remove any
dirt and dust.

Wash the vehicle body using a sponge or soft cloth, such as a cham-
ois.

For hard-to-remove marks, use car wash soap and rinse thor-
oughly with water.

Wipe away any water.

Wax the vehicle when the waterproof coating deteriorates.

If water does not bead on a clean surface, apply wax when the vehicle
body is cool.

Summary of Contents for AVALON 2008

























































































































































































































































































































































































































































































Search results

Summary of Contents for AVALON 2008

Reviews:

Brands by name

Popular brands

Toyota AVALON 2008, Quick Reference Manual

Search results

Summary of Contents for AVALON 2008

Reviews:

Brands by name

Popular brands