Toyota AVALON 2008 Quick Reference Manual Download Page 107

Page: 107 / 472

AVALON_U_(L/O_0802)

1-7. Safety information

Correct driving posture

Drive with a good posture as follows:

Sit upright and well back in
the seat.

Adjust the position of the
seat forward or backward to
ensure the pedals can be
reached and easily
depressed to the extent
required. (

→

P. 46)

Adjust the seatback so that
the controls are easily oper-
able.

Adjust the tilt and telescopic
positions of the steering
wheel downward so the air-
bag is facing your chest.

(

→

P. 61)

Lock the head restraint in
place with the center of the
head restraint closest to the
top of your ears. (

→

P. 53)

Wear the seat belt correctly.
(

→

P. 54)

Summary of Contents for AVALON 2008

























































































































































































































































































































































































































































































Search results

Summary of Contents for AVALON 2008

Reviews:

Brands by name

Popular brands

Toyota AVALON 2008, Quick Reference Manual

Search results

Summary of Contents for AVALON 2008

Reviews:

Brands by name

Popular brands