Toyota AVALON 2008 Quick Reference Manual Download Page 136

Page: 136 / 472

109

1-7. Safety information

Before driving

AVALON_U_(L/O_0802)

Open the anchor bracket cover,
latch the hook onto the anchor
bracket and tighten the top strap.

Make sure the top strap is
securely latched.

STEP

Laws and regulations pertaining to anchorages

Anchorages conform to FMVSS225 or CMVSS210.2.

Child restraint systems conforming to FMVSS213 or CMVSS213 specifica-
tions can be used.

This vehicle is designed to conform to the SAE J1819.

CAUTION

When installing a booster seat

Do not fully extend the shoulder belt to prevent the belt from going to ALR
lock mode: (

→

P. 56)

ALR mode causes the belt to tighten only which could cause injury or dis-
comfort to the child.

Do not allow the child to play with the seat belt or the child could be killed
or serious injured.

Summary of Contents for AVALON 2008

























































































































































































































































































































































































































































































Search results

Summary of Contents for AVALON 2008

Reviews:

Brands by name

Popular brands

Toyota AVALON 2008, Quick Reference Manual

Search results

Summary of Contents for AVALON 2008

Reviews:

Brands by name

Popular brands