manualshive.com logo in svg

Toyota AVALON 2008, Quick Reference Manual

Share
Download
Toyota AVALON 2008 Quick Reference Manual Download Page 184

158

2-4. Using other driving systems

AVALON_U_(L/O_0802)

n

The dynamic laser cruise can be set when

l

The shift lever is in “D” or the “4”, “5” or “6” range of “S” mode. 

l

Vehicle speed is between approximately 28 mph (45 km/h) and 85 mph 
(135 km/h). 

n

Accelerating

The vehicle can be accelerated normally.

n

Automatically canceling vehicle-to-vehicle distance control

Vehicle-to-vehicle distance control driving is automatically canceled in the 
following situations.

l

Vehicle speed falls below 25 mph (40 km/h)

l

VSC is activated

l

The sensor cannot operate correctly because it is covered in some way

Vehicle-to-vehicle distance control driving must be reset by turning the “ON-
OFF” button on again.

If vehicle-to-vehicle distance control driving is automatically canceled for any 
other reason, there may be a malfunction in the system. Contact your Toyota 
dealer. 

n

Automatically canceling constant speed control

The set speed is automatically canceled in the following situations. 

l

Actual vehicle speed is more than 10 mph (16 km/h) below the preset 
vehicle speed

 

At this time, the memorized set speed is not retained.

l

Vehicle speed falls below 25 mph (40 km/h)

l

VSC is activated

Summary of Contents for AVALON 2008

























































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands