Toyota AVALON 2008 Quick Reference Manual Download Page 151

Page: 151 / 472

125

2-1. Driving procedures

en drivin

AVALON_U_(L/O_0802)

CAUTION

When starting the engine

Always start the engine while sitting in the driver’s seat. Do not press the
accelerator pedal while starting the engine under any circumstances.

Doing so may cause an accident resulting in death or serious injury.

While driving

Do not touch the “ENGINE START STOP” switch while driving.

Pressing and holding the “ENGINE START STOP” switch will stop the
engine, which may lead to an accident.

NOTICE

To prevent battery discharge

Do not leave the “ENGINE START STOP” switch in ACC or ON mode for
long periods if the engine is not running.

When starting the engine

Do not race the engine.

If the engine becomes difficult to start or stalls frequently, have the engine
checked immediately.

Summary of Contents for AVALON 2008

























































































































































































































































































































































































































































































Search results

Summary of Contents for AVALON 2008

Reviews:

Brands by name

Popular brands

Toyota AVALON 2008, Quick Reference Manual

Search results

Summary of Contents for AVALON 2008

Reviews:

Brands by name

Popular brands