Toyota AVALON 2008 Quick Reference Manual Download Page 400

Page: 400 / 472

W
h

en
t

ub
le

ise
s

377

5-2. Steps to take in an emergency

AVALON_U_(L/O_0802)

If the malfunction indicator lamp comes on while driving

First check the following:

Is your vehicle low on gas?

If it is, refuel the vehicle immediately.

Is the fuel tank cap loose?

If it is, tighten it securely.

The light will go off after taking several driving trips.

If the light does not go off even after several trips, contact your Toyota dealer
as soon as possible.

SRS warning light

This warning light system monitors the following:

The airbag sensor assembly

Front airbag sensors

The curtain shield airbag sensors

The side and curtain shield airbag sensor assemblies

The driver’s seat position sensor

Driver’s seat belt buckle switch

The front passenger occupant classification ECU

The pressure sensor

The belt tension sensor

“AIR BAG ON” and “AIR BAG OFF” indicator lights

Front passenger’s seat belt buckle switch

The inflators

The warning light

The interconnecting wiring and power sources

Summary of Contents for AVALON 2008

























































































































































































































































































































































































































































































Search results

Summary of Contents for AVALON 2008

Reviews:

Brands by name

Popular brands

Toyota AVALON 2008, Quick Reference Manual

Search results

Summary of Contents for AVALON 2008

Reviews:

Brands by name

Popular brands