Toyota AVALON 2008 Quick Reference Manual Download Page 173

Page: 173 / 472

147

2-3. Operating the lights and windshield wipers

en drivin

AVALON_U_(L/O_0802)

The windshield wiper and washer can be operated when

The “ENGINE START STOP” switch or the engine switch is in ON mode.

Dripping prevention wiper sweep

After washing and wiping operation several times, the wipers operate one
more time after a short delay to prevent dripping.

However, the last sweep will not happen if the vehicle is traveling above 106
mph (170 km/h).

Effects of vehicle speed on wiper operation

Vehicle speed affects the following even when the wipers are not in “AUTO”
mode.

Intermittent wiper interval (“INT” mode)

Wiper operation when the washer is being used (delay until drip preven-
tion wiper sweep occurs)

With “LO” selected, wiper operation will be switched from low speed to inter-
mittent wiper operation only when the vehicle is stationary.

Rain drop sensor (vehicles equipped with the raindrop detection wind-
shield wipers)

If no windshield washer fluid sprays

Check that the washer nozzles are not blocked if there is washer fluid in the
windshield washer fluid reservoir.

The sensor judges the amount of rain-
drops.

Summary of Contents for AVALON 2008

























































































































































































































































































































































































































































































Search results

Summary of Contents for AVALON 2008

Reviews:

Brands by name

Popular brands

Toyota AVALON 2008, Quick Reference Manual

Search results

Summary of Contents for AVALON 2008

Reviews:

Brands by name

Popular brands