Toyota AVALON 2008 Quick Reference Manual Download Page 227

Page: 227 / 472

202

3-2. Using the audio system

AVALON_U_(L/O_0802)

Canceling random, repeat and scan playback

Press ,

again.

Display

Up to 12 characters can be displayed at a time.

If there are 13 characters or more, pressing and holding

for 1 sec-

ond or more will display the remaining characters.

A maximum of 24 characters can be displayed.

Depending on the contents recorded, the characters may not be displayed
properly or may not be displayed at all.

Error messages

Refer to the following table and take the appropriate measures. If the prob-
lem is not rectified, take the vehicle to your Toyota dealer.

Message

Cause

Correction

Procedures

WAIT

Operation is stopped
due to high

temperature inside the
player

Eject the disc and allow
the player to cool down

ERROR 1

• The disc is dirty or

damaged

• The disc is inserted

upside down

• Clean the disc
• Insert the disc correctly

NO DISC

There is no disc

Insert a disc

ERROR 3

There is a malfunction
within the system

Eject the disc

ERROR 4

Over current

Ask your Toyota dealer

NO MUSIC

This indicates that no
playable data is
included in the disc

Eject the disc

Summary of Contents for AVALON 2008

























































































































































































































































































































































































































































































Search results

Summary of Contents for AVALON 2008

Reviews:

Brands by name

Popular brands

Toyota AVALON 2008, Quick Reference Manual

Search results

Summary of Contents for AVALON 2008

Reviews:

Brands by name

Popular brands